CREATORS' CLOUD
    Remote Camera Tool

    Multi Camera View

    Multi Camera View / Description of each part

    • Do not operate the camera body while performing operations in Remote Camera Tool.
    • The supported operations differ depending on the camera model. For details, refer to “Supported cameras.”
    • The operations and settings for each camera are the same as those in Single Camera View. For details, refer to "Single Camera View."
    Multi Camera View. Items are labeled A to D. Refer to the following for details.

    • A. Live View area display setting

      Allows you to change the number of cameras displayed in each row of the Live View area.

    • B. Live View area

      This frame is displayed when a camera is selected; you can tap it to switch to the camera control window.
      You can click or tap an unconnected camera to establish a connection.
      You can drag and drop the selected camera to move its position in the Live View area.

    • C. Camera status display

      Camera status display area. Items are labeled 1 to 11. Refer to the following for details.

      • C-1. No. of Device List window

      • C-2. Assigned shortcut key

      • C-3. Camera Name

      • C-4. FTP status

      • C-5. Group number

      • C-6. Battery charge remaining

        • In some cases, the combined charge remaining in two batteries may be displayed.

      • C-7. SD card capacity remaining (SLOT 1)

      • C-8. SD card capacity remaining (SLOT 2)

      • C-9. Information on transfer errors, etc.

      • C-10. Live View ON/OFF

      • C-11. Opens Single Camera View (displayed only when using a computer)

    • D. Group Shutter

      You can shoot with cameras of the selected group at the same time.
      You can shoot on all connected cameras by selecting [ALL].

      * On the iPad, you can check shot images by opening the Files app and going to RCT → Pictures under "On My iPad."

    Changes the frame rate in Multi Camera View

    * This function is available only when using a computer.

    You can change the frame rate in Multi Camera View by placing the downloaded defaultsettings.conf file in the folder shown below.
    defaultsettings.conf Click to download a file.

    Windows: C:\Users\[login ID]\AppData\Roaming\Sony Corporation\Remote Camera Tool\

    Mac: /Users/[login ID]/Library/Preferences/Remote Camera Tool/

    defaultsettings.conf Example: MultiViewFrameRate=15

    The settings take effect when Remote Camera Tool is restarted.