VPL-FX40 ^{Previous Model}

*Networking Presentations

When the VPL-FX40 projector is installed on a LAN via RJ45, presentations can be projected from any PC on that network whether connected via a LAN cable or wirelessly. In addition, an innovative new feature - High-Speed Image Transfer over IP Networks means that because the VPL-FX40 projector employs efficient compression and transmission techniques, it can receive and project images via IP networks for effective presentations from any networked PC

Monitor Out

The VPL-FX40 projector can display the image simultaneously on a large screen and on an additional monitor (via a 15-pin D Sub connection), so that the user can face the audience and still see the information being shown.

Low Fan Noise

For an undisturbed presentation, quiet operation is very important. The noise level of the VPL-PX40 is 28dB in low mode which is considered less than a whisper.

RS-232C

Connections include an RS-232C port for control of the projector.

Password Protection

When this function is activated a password is required to use the projector (if the password is lost, Sony is able to retrieve it).

Control Panel Lock

This function locks the controls on the top and side of the projector, to prevent unauthorised or unintentional use of the controls. Functionality can be switched "on" or "off".

Centered Lens Design

This function locks the controls on the top and side of the projector, to prevent unauthorised or unintentional use of the controls. Functionality can be switched "on" or "off".

Off and Go

No cool down time needed, just switch off and pack away! The fan continues to cool the VPL-FX40 after the power supply is removed, enabling users to unplug the projector immediately after use, without damaging the lamp or optics. Other projectors need to remain connected to the power supply to cool the projector after use.

Direct On / Off

Ceiling mounted projectors notoriously remain on after the meeting concludes and the attendees leave the room which in turn burns unnecessary hours on the lamp and electricity. The VPL-FX40 can be set to skip the standby mode, so that it can be turned on / off directly using a main switch.

Power Zoom/Focus/Picture Shift (Horizontal and Vertical)

The Zoom, Focus, and Horizontal and Vertical Picture Shift functions available with the projector’s supplied power-operated lens and optional lenses (except VPLL-1008) can be controlled both from the projector control panel and the supplied Remote Commander™ unit. Images can be easily adjusted to the desired settings both during installation and when the projector is in use

ID Function for Multi-Projector Installation

Multiple Projectors, one Remote Commander! The VPL-FX40 projectors have a built-in ID function, so each projector can be controlled independently from a single Remote Commander unit.

ECO INFO

Halogenated flame retardants are not used in cabinets or printed wiring boards. Corrugated cardboard is used for the packaging cushions. Standby power consumption: 0.5 W.